Collection: All Products

The Surron Moto Brake Dual Caliper bracket keeps your stock hand brake and allows use of a foot brake to get the real dirt bike feel. It ships with all hardware, ready to bolt-on and ride. The Dual Caliper Moto Brake Bracket is designed specifically to run Surron Ultra Bee calipers. What's in the box? 1 Dual caliper bracket 1 Brake disc guard for the Dual Caliper Bracket All necessary hardware Specs: Made From 6061-T6 aluminum (Black Color) Made to use Surron Ultra Bee Brake Calipers Made to allow use of both a Moto Foot Brake and the Moto Hand Brake Assembly  Made to Fit our 240mm Moto Brake Rotor  Fits These Bike Models: Surron Light Bee (all years) Eride Pro SS 2.0 Eride Pro SS 3.0 Eride Pro S Eride Pro SR Talaria X3 Talaria MX3 Talaria MX4 DOES NOT FIT TALARIA MX5 Surron Moto Brake Dual Caliper Bracket FAQ Will this dual caliper bracket fit my bike? It fits the Surron Light Bee, Eride Pro SS 2.0, SS 3.0, S, and SR, and the Talaria X3, MX3, and MX4. It does not fit the Talaria MX5. The bracket mounts to the factory rear swingarm, so no frame modification is needed. What else do I need to run it? The bracket is the mount only. You also need a Surron Ultra Bee rear caliper and the 240mm Moto Brake Rotor it is built around, plus a foot brake or hand brake to operate it. Run a caliper on each side to use both at once. Does it come with a caliper or brake fluid? No. The bracket ships with the bracket, a brake disc guard, and all mounting hardware. The caliper is sold separately, and there is no hydraulic system on the bracket itself, so there is nothing to bleed. What does running dual calipers actually do? It lets you run a foot brake and a hand brake at the same time, each with its own caliper on the same rear rotor. That gives you independent foot and hand control of the rear brake. It adds a second control, not extra clamping force to one brake. Can I start with one brake and add the second later? Yes. The bracket carries mounts for both calipers, so you can run a single caliper now and add the second later without changing the bracket. Most riders set it up to run both. How hard is the install? Do I need to cut or fabricate? It is a bolt-on install with all hardware included, no cutting and no fabrication. The bracket goes on at the factory rear points as part of your foot brake or hand brake install. Follow the matching install guide for the step-by-step. Ships from USA! Updated ~ 06/24/2026

ETM RTR 14” Street Wheel Kit Transform your ETM RTR into the ultimate big-wheel street machine with this direct-fit 14” Street Wheel Kit. Designed specifically for the ETM RTR platform, this setup delivers improved street performance with pre-mounted street tires that provide a smooth, comfortable, and quiet ride. Specifications Tire Size: 90/90-14 Rim Size: 1.85 x 14 What’s Included 14” Street Wheels with Pre-Mounted Street Tires (2) RTR Brake Rotors Additional Parts Required 2025 ETM RTR / ETM RTR Lite ETM RTR 86T #35 Rear Sprocket 140L #35 Thicc Chain #35 Chain Breaker (recommended for installation) 2026 ETM RTR Sport RTR XL 63T 420 Rear Sprocket RTR Sport 92L 420 Chain (for 14” wheel setup) RTR XL Models RTR XL 63T 420 Rear Sprocket RTR XL 96L 420 Chain Fitment Compatible with: ETM RTR ETM RTR Lite ETM RTR Sport RTR XL Models Not Compatible With: Razor Line ETM V2 Important Information These wheels are designed exclusively for ETM RTR platform bikes. Please verify compatibility before purchasing. All sales are final. No returns or exchanges are accepted on this product.

This OEM Surron Ultra Bee brake assembly is a complete, pre-bled replacement designed for clean fitment and reliable stopping power. It includes the master cylinder, rear brake line, and genuine OEM Surron Ultra Bee brake caliper, making installation straightforward for riders restoring brake performance. Compatible with 2023, 2024, and 2025 Surron Ultra Bee models.

The EBMX XLB-60 RACE was designed to surpass every motor in its class. Built to stay cool under race conditions so you focus on riding, not motor temps — track, street, or trail, if you want the best, this is it.Features 35KW rated and tested, designed from the ground up to handle the heat — 180C rated windings with U42H magnets Custom IPM rotor design with industry-leading 1mm rotor air gap, revving out to a rated 13000RPM Encoder-based motor control for increased low-end torque response and smooth, predictable power delivery Encoder sensors track motor position at all speeds and more frequently than hall sensors — no estimated rotor positions, no current spikes from wheel spin or sudden deceleration with rapid throttle changes that trip controllers and cut throttle power Finely tuned to work with the EBMX X-9000 controller; works with many other controllers but may require your own custom tuning Includes EBMX XLB-60 RACE Motor Custom EBMX Bash Plate Recommended Gearing Off Road: 18 inch 58T-64T (75MPH top speed with 64T/72V) Off Road: 16 inch 54-58T Off Road: 17 inch 56T-60T Recommended X9000 Settings (400Amp BMS 20S/22S) 1000 Phase / 30KW 900 Phase / 25KW 800 Phase / 20KW Need more range? Try turning field weakening to 0%. With a 64T sprocket off-road on 21/18 wheels, 65MPH is easily achievable on a 72V battery — increasing range by up to 15%.Real World Motor Testing ResultsYour results may vary based on rider weight, gearing and battery performance. 85KG rider, 75KG EBMX-built Surron, 64T sprocket 1000 phase amps / 500 DC amps 20S 72V race battery: peak power 32-34KW 22S 81V race battery: peak power 36-38KW FitmentSurron Light BeeNote — IMPORTANT SAFETY CONSIDERATIONS: These motors are significantly faster than standard motors and their extreme speed can pose serious risks if not handled with caution. NOT INTENDED FOR ROAD USE: EBMX Motors are NOT designed for use on public roads or crowded areas. Strictly for off-road use and controlled environments only. EXPERIENCED RIDERS ONLY: Recommended for experienced riders with the skills to handle powerful machines. Novice riders are strongly advised against using these motors. USE WITH CAUTION: The enhanced speed and power require extreme care and attentiveness. Always be aware of your surroundings. UPGRADE SAFETY EQUIPMENT: Ensure your bike has upgraded brakes and safety features capable of handling the increased speed and power. Using stock brakes or inadequate safety measures may result in accidents and severe injuries. ADHERE TO LOCAL LAWS: Know your local off-road vehicle regulations. Ride within designated areas and private tracks only. KEEP AWAY FROM CHILDREN: These motors are not toys. Never allow minors or inexperienced individuals to operate them. RIDE RESPONSIBLY: Never operate under the influence of any substance that could impair judgment. By purchasing and using EBMX Motors products, you acknowledge the inherent risks of high-speed off-road motor use. EBMX shall not be liable for any injuries, accidents, damages, or losses from improper usage, negligence, or failure to adhere to this disclaimer.

The EBMX XLB-60 CORE isn't just a motor — it's a revolution. Raw power, cutting-edge electric performance, and maximum performance at unmatched value, strategically priced for riders who demand more speed, more torque, and more freedom. MAP $999.89Features High-performance electric power with smoother torque delivery Rugged design engineered for extreme off-road conditions, agile street riding, and next-level stunt performance Smoother throttle response for maximum control and confidence Encoder sensors provide superior control over hall sensors with precise rotor position tracking at all speeds — smoother, more responsive power band and reduced controller issues Suitable for use, with an upgraded battery, in Surron Light Bee, E-Ride Pro and more to come Tech Specs Stator: 64mm Power: 87KV — 41kW peak under load testing (90v, 1100 phase amps) Voltage Range: 48v-104v Max Phase Current: 1200A Max Rated RPM: 12,000 Sensor: Encoder NJDC 605 Motor Configuration: 10 poles, 12 slots Real World Results: 32-35kW on 72v with 18" rear and 52T sprocket Recommended Off-Road Gearing: 18" — 52t sprocket; 16" — 48t sprocket Warranty: 2 years Fitment Surron Light Bee E-Ride Pro SS 79Bike Falcon More to come

Looking to significantly increase the size and strength of your SurRon or E Ride Pro SS 2.0? The EBMX swingarm will extend your wheelbase by over 2" and increase your rear wheel travel by 3/4".  This will make your Surron or E-Ride 2.0 more stable and planted and reduce the front wheel from coming up during hard acceleration. 60mm (+2.4") Longer Wheelbase 220mm (+3/4") suspension travel (with EBMX YSS shock and linkage) Stronger and more rigid for less flex Support for wider tires  Highly recommended to pair this with the EBMX YSS rear shock and linkage for the increased loads on your rear shock with this extended swingarm.  A longer swingarm increases the forces into your rear shock and must be matched to a high quality shock with a higher spring rate.  OEM style shocks will not perform well with this upgrade. Compatibility Surron Light Bee E Ride Pro 2.0 NOT COMPATIBLE with any other bike Chain NOT included Specs Designed specifically for SurRon Light Bee / Segway X160/X260 and E Ride Pro 2.0 Compatible with stock sprockets and 54T-58T, and 64T rear sprockets Works with most upgraded suspension systems and rear wheels Massive strength upgrade over OEM swingarm Dirt-shedding design improves reliability Supports larger sprocket setups with integrated chain guide (available separately) Extended 60mm for better high-speed stability and cornering Key Features Reinforced CNC-Machined DesignBuilt from aerospace-grade billet aluminium, this new swingarm boasts a dirt-shedding geometry and robust construction. The fully CNC-machined structure ensures tighter tolerances, greater durability, and a finish that speaks to both performance and premium craftsmanship. Extended Length for Stability and ControlThe extended geometry improves rear wheel traction and stability—especially valuable in high-power, off-road conditions. This means better control, smoother landings, and improved handling under acceleration. New Chain Guide System (sold separately)A complete new chain guide system now supports 54T-58T, and 64T sprockets, catering to torque-focused setups for trail, climb, or stunt applications. This system helps keep your chain in line, even under extreme conditions Improved Mud & Debris ClearanceThe new swingarm features precision-cut channels that actively shed dirt and debris, reducing buildup and minimising maintenance. Ideal for riders who don't shy away from tough trails and muddy terrains. Aftermarket Ready – Chain Replacement RequiredDue to the extended design, your existing chain will be too short. A new chain is required and should be sized appropriately for your sprocket selection and tension preferences.

The Most Advanced E-Moto Controller on the MarketBuilt from the ground up for serious riders and racers, the EBMX X-9000-V3 is more than a controller — it's a complete performance ecosystem. Re-engineered power stage, cutting-edge logic, and a redesigned user interface deliver unmatched power, precision, and customization on streets, trails, or the racetrack.Performance Specs 50kW output 1000A phase current / 1600A burst 30 × 120V Infineon MOSFETs Redesigned multilayer PCB & CNC copper busbars Water-cooling option available IP67 rated CNC alloy case Smart Features 68 IO support Custom EBMX VESC firmware with FOC Integrated IMU for Wheel Lift Assist Dual hall throttle ready 6 fully customizable power levels (Race + Street modes) Graphical UI with Load & Go battery profiles 30+ preloaded motor tunes One-touch OTA updates FitmentCompatible with the following bikes: Sur-Ron Light Bee X Sur-Ron Ultra Bee Talaria MX3 / MX4 / MX5 Talaria XXX & XXX PRO E-Ride Pro SS 2.0 (V3 battery plug) E-Ride Pro SS 3.0 (with breaker) E-Ride Pro SS 3.1 (no breaker) E-Ride Pro SR ReRode R1 QS138 motors Includes everything needed for mounting and installation.

Full twist/Surron Throttle for E-bikes This pre-wired, Plug n Play throttle uses a 3-pin connector, making it a seamless addition to your E-bike setup. Fully Manufactured by professional and Factory Grade Quality Featuring: Plug n Play Design: Easily install your new throttle without the need for complex wiring or tools. Enhanced Responsiveness: Experience smoother acceleration and improved control for a superior ride. Durable Construction: Made with high-quality materials designed to withstand the rigors of off-road and on-road biking. Perfect for E-bike enthusiasts looking for an effortless upgrade, the Full twist/Surron Throttle ensures that you can ride with confidence and style. this throttle is the ideal choice for anyone wanting to enhance their electric biking experience.

Upgrade your Talaria XXX with these awesome looking Side Plastic decals!  - Please Clean Off Surface of the Plate Before Installation For Long Lasting Stickiness! - Please discard minor imperfections

2 styles of mini plastic odi and motocuts keychains. Mini plates will fit perfectly on these keychains! Mini plate decals are sold separately.