Collection: All Products

OEM Surron Ultra Bee Brake Caliper Front Replacement Specs: OEM Replacement Front Caliper Includes OEM Caliper Bracket Includes 1 Set of OEM Sintered Brake Pads + Pad Spring Includes 1 Banjo Bolt + Copper Crush Washers Fits These Models: Surron Ultra Bee (all years) Moto Brake Kits for Surron Light Bee, Talaria, Eride Pro SS, ETC Arctic Leopard EX Models Ships From USA!

Surron Ultra Bee Brake Assembly Rear OEM Replacement Front Assembly Includes: Ultra Bee Master Cylinder, Ultra Bee Rear Brake Caliper, Rear Brake Line Comes Pre-Bled! Fits: Surron Ultra Bee Fits These Models: Surron Ultra Bee (all years) Ships from USA!

Dual Caliper Surron Moto Brake Kit | Talaria X3 / M4 | Eride Pro SS / SR Specs: 1 Dual Caliper Bracket (CNC Machined from 6061 T6 Aluminum, Black Anodized) 1 Surron Ultra Bee Rear PRE-BLED Brake Assembly: 1 Rear Brake Caliper 1 Moto Brake Master Cylinder 1 Brake Line Custom 240mm x 3.5mm Brake Rotor make from 12CR13 Stainless Steel Fits The Following Models: Talaria XXX, MX3, MX4 (DOES NOT FIT MX5) Surron Light Bee X (Segway X160/X260) all years Eride Pro S, Pro SS 1.0 / 2.0, 3.0 & SR Ventus One Bike Watch our Installation Video for Surron Light Bee!  View the Full Step-by-Step Install Guide & Tool List Here Ships From USA!

Single Caliper Surron Moto Brake Kit | Talaria X3 / MX4 | Eride Pro SS What’s included in the kit: 1 Single Caliper Moto Brake Bracket  1 Moto Brake Assembly OEM (Surron Brand) or Black (Gen1 Surron Ultra Bee Caliper from 2023/2024) 1 Floating or Solid 240mm x 3.5mm Brake Rotor Specs: Caliper Bracket Made From 6061 T6 Aluminum OEM Surron Brand Brake Assembly or Gen1 Black Version (Same Caliper Design as the Original 2023 & 2024 Surron Ultra Bee Brakes) 240mm Diameter, 3.5mm Thick Rotor Made From 420 Stainless Steel Floating Rotors have an Aluminum 6061 T6 Inner Carrier With Stainless Steel Rivets Comes PRE-BLED with Motul DOT 5.1 Brake Fluid Fits The Following Models: Surron Light Bee (all years) Eride Pro SS 1.0, 2.0, 3.0 & SR /  Pro S (all years) Talaria XXX / X3, MX3, MX4, MX5 (all years) Ventus One Bike (all years) Watch our Installation Video for Surron Light Bee!  View the Full Step-by-Step Install Guide & Tool List Here Ships From USA!

Upgrade your ride with custom foot pegs built for performance — 6061 aluminum body with Grade 5 titanium grip pins, available in 7 peg colors and 8 grip colors for a fully personalized setup. Key Features Aerospace-Grade Titanium Pins: Grip pins made from certified Titanium Grade 5 6AL-4V — stronger, lighter, and more corrosion-resistant than steel. 6061 Aluminum Peg Body: Lightweight and durable platform machined for a solid, confident feel underfoot. Mix & Match Colors: Choose your peg color and grip pin color independently. For custom color combinations not listed, leave a message at checkout. Lifetime Warranty: Built to last — backed by a lifetime warranty. Dimensions: 2¼ in. × 3½ in. Fitment Surron LBX, LBS, L1E Segway X-260, X-160 E-Ride Pro (all models) 79-Bike Falcon M, Pro Rerode R1 Ventus One SRPNT Most light e-moto compatible with Surron LBX-style pegs Not listed? Contact us to check compatibility. Note: Not designed for Talaria or Altis Sigma models. See our Talaria & Altis listing for those bikes. Includes 1 pair of foot pegs (left & right)

Upgrade your ride with foot pegs built for grip, style, and durability. These custom pegs pair a lightweight CNC aluminum base with Grade 5 titanium grips for confident footing in wet, muddy, high-vibration conditions — and a look that stands out in your choice of colors. Features Pegs machined from certified 6061 aluminum Peg grips made from Grade 5 titanium alloy for superior bite and corrosion resistance Multiple color options — for custom color pins, leave a message when ordering Lifetime warranty Dimensions: 2 1/4 in. x 3 1/2 in. Not designed for Surron LBX or most similar light e-motos. Surron Light Bee pegs are found here. Fitment Talaria MX3, MX4, MX5, XXX Altis Sigma

Made From CNC-Machined 6061 T6 Aluminum We offer both Kickstand side replacements, Right side peg bracket Replacements or a set that includes both! Much stronger than the cast aluminum version the stock Talaria XXX comes with, our upgraded peg brackets are meant to last longer during hardcore offroading, wheelies in the streets, and even when you crash! Install Tips We recommend you use blue Loctite on the bolts when installing the upgraded peg brackets. install is pretty straight forward, you remove 2 bolts from your OEM peg brackets, clean off the surface area on your frame, check the bolts threads to be sure they are clean and not stripped. Then apply blue Loctite and torque all 4 bolts to spec and your are done! FAQ: Does aftermarket kickstands fit with these foot peg brackets? - Yes, you can use your OEM kickstand or any aftermarket kickstand will bolt up!Do you need a support brace for these peg brackets like they do on the Surron Light Bee? - No we do not make a support brace for the Talaria XXX peg brackets yet as it has not been needed.Can I only order the Kickstand side bracket if I'm running a foot brake? - Yes we do sell each side individually & they pair quite nice with our foot brake for the XXX Ships from the USA!

Upgraded 220mm Brake Rotors for Surron Light Bee, Eride Pro SS, Talaria XXX / MX3 / MX4 Specs: 220mm outer diameter  2.3mm thickness Our custom flame design improves airflow and rids brake pad dust faster Made from 12CR13 stainless steel Fits These Models: Surron Light Bee (all years) Eride Pro SS 1.0  / 2.0 / Pro S (DOES NOT FIT 3.0 or SR) Talaria XXX, MX3, MX4 (DOES NOT FIT MX5) Ventus One Bike 79Bike Install Guide Remove the wheel. Warm each rotor bolt just enough to soften thread locker. Remove bolts and lift the old rotor away. Apply a light bead of blue thread locker to clean bolts. Seat the new rotor and hand snug all bolts in a star pattern. Torque each bolt to spec with a torque wrench. Refit the wheel and spin to confirm clearance. Install fresh pads and bed everything in with slow controlled stops. FAQ Q: Does this fit the Ultra BeeA: No. This version is for the Surron Light Bee. Q: Will it rub in an MTB style caliperA: Most modern calipers accept 2.3 millimeter rotors. Center your caliper and verify clearance. Q: Do I need new padsA: Highly recommended. New pads plus a proper bed in gives the strongest bite and least noise. Q: What direction should the flame faceA: Look for the text lasered onto the rotor, the text should be facing you when you mount the rotor Ships from USA

Rear Brake CaliperFor Surron Ultra Bee OEM Replacement Rear Brake Caliper Fits: Surron Ultra Bee, ( or FactoryZ Moto Brake Kits ) Package Includes: 1 Surron Ultra Bee Rear Brake Caliper 1 Rear Brake Caliper Bracket  All OEM Hardware ( 1 Banjo Bolt + 2  Copper Crush Washers, 2 Calipers Posts, 2 Pad Pins, 1 pad set, 1 Pad Spring, 1 Bleeder Valve + Cover) Ships From USA!!

Bash Guard / Controller Bracket Reed Nuts Includes 5 pieces M6 x 1.00 or M8 x 1.25 Reed Nuts Fits: Surron, Talaria, Eride Pro SS, Ultra Bee, ETC M6 is the size you need for Front Battery Plate on Surron Light Bee M8 is the size you need for Bash Guard / Skid Plate on Surron Light Bee Ships from USA!

Gates Power Grip GT4 Belt For Surron Light Bee, Eride Pro, Talaria XXX Fits the following models: Surron Light Bee ( all years ) Talaria XXX / X3 ( all years ) Eride Pro SS 1.0 / 2.0 / 3.0 / SR, Eride Pro S ( all years ) Specs: Much Stronger Then Stock Belt Built with Gates GT4 Carbon Fiber Technology Extreme Strength for High Power Builds (20KW+) Ships From USA!