Collection: Products

Running the Technic-Q MX extended swing arm on your Sur-Ron Ultra Bee? This decal is cut for that arm specifically — not the stock one, so it actually covers the extra length instead of leaving a gap where the graphic runs out. Clean, aggressive finish on one of the most visible parts of the bike, and it ties into the rest of your setup. Available in four styles: choose Standard for the full logo design, Minimal for a clean look with just a small Summit MX logo, Carbon Fiber for a high-end carbon fiber pattern that adds subtle texture and depth, or Vertex for the same tight three-point lattice mesh that runs on our Vertex number plate — so you can carry that pattern from the plate down to the swing arm. Every style is printed on premium moto-grade vinyl and protected with a durable laminate.

Burnt blue titanium banjo bolts. Includes upgraded crush washers for better sealing. A few quick bleed cycles are recommended after loosening the brake line to swap the bolts+washers. Choose your fitment option: -Surron Ultra Bee brakes or footbrake kits-1 complete brake (2 bolts with seals) -Stark Varg Formula Masters + front Brembo FRONT caliper (3 bolts with seals) -Brembo front caliper (single bolt with seals) If you need titanium for both front and rear brakes or footbrake, make sure to order the correct quantity of bolt kits.

This kit includes 2 or 4 titanium bolts that mount to your brake reservoir cap. Only fits formula brakes   

Surron Ultra Bee & Volar Sport Titanium Brake Reservoir Cap Bolts Upgrade your brake setup with titanium brake reservoir cap bolts designed for the Surron Ultra Bee and Volar Sport brakes. These titanium bolts replace the factory brake reservoir cap hardware for a clean, premium look while adding a high-quality finishing touch to your bike. Kit Includes: Choice of 2 or 4 titanium bolts Direct replacement for brake reservoir cap bolts Lightweight and corrosion-resistant titanium construction Quick and easy installation Fitment: Surron Ultra Bee stock brakes Volar Sport brakes Perfect for riders looking to upgrade their Surron Ultra Bee titanium hardware, customize their brake setup, or replace their factory reservoir cap bolts.  

Titanium Stem Bolt Kit – Universal E-Moto Fitment Upgrade your cockpit with this titanium stem bolt kit, designed to fit most popular e-moto and e-bike stems. These titanium bolts replace your factory stem hardware for a clean, premium look while providing lightweight, corrosion-resistant performance. Kit Includes: 4 titanium stem bolts Direct replacement for factory stem bolts Quick and easy installation Fitment: Fits most Surron, E Ride Pro, Talaria, and other e-moto stems Compatible with most aftermarket stems Please Note: Not compatible with Warp 9 stems.  Perfect for riders looking for Surron titanium bolts, E Ride Pro titanium hardware, Talaria titanium bolts, or aftermarket stem hardware upgrades.

Fork titanium bolts This kit includes 11 titanium bolts that fit your stock suspension, Ext Ferros, Fastace, bomber 58's, fox 40's and RFloxa front forks.  

V2 kits for the Altis Sigma are now available. V1 kits have been discontinued. Kits include visible bolts only. Custom titanium bolt kits for the Altis Sigma.  Anodized/ PVD coated to perfection Increased corrosion resistance Made from certified Titanium Grade 5 6AL-4V Rolled threads for greater fatigue strength Greater strength to weight ratio than steel 40% lighter in weight compared to OEM Exclusively sold at Titanium Surron    Kits include: Peg pins  Motor mount Handlebar riser clamp Kickstand bolt/ nut Left side drivetrain cover Sprocket Foot peg bracket Front number plate/ triple clamp bracket Front fork caliper bracket Front/ rear caliper mount to brake caliper bracket Front side fender bracket Skid plate/ motor bash guard Controller bracket (visible bolts only) Rear rotor bolts Front number plate to bracket Controller shroud Front side fenders Chain guard Rear mud flap Rear subframe/ seat bottom plastic Brake handle pinch clamps Throttle clamp to handlebar Front rotor bolts Peg Pins Rear axle nut   Optional: Forks bolts Rear Shock Mount Bolts (4 Pieces) Rear Linkage Kit     The body kits are designed around an OEM Altis Sigma. Some installed aftermarket parts may require additional hardware.    Photos are examples of color only and do not represent actual kits.   

Custom titanium bolt kits for the E-Ride Pro SS 2.0. Anodized/ PVD coated to perfection Increased corrosion resistance Made from certified Titanium Grade 5 6AL-4V Rolled threads for greater fatigue strength Greater strength to weight ratio than steel 40% lighter in weight compared to OEM Exclusively sold at Titanium Surron and authorized retailers only Kits include: Peg pins Kickstand bolt/ nut Rear axle nut Jackshaft nut Motor mount bolts Peg bracket bolts Subframe bolts (custom head) Skid plate/ bash guard bolts Sprocket bolts Chain/ mud guard bolts Ignition cover bolts Brake caliper bolts (20mm x4) Front rotor bolts Rear rotor bolts Headlight bracket hardware Upper frame bolts near batt lid pins Controller bolts Handlebar to OEM neck (stem) bolts Handlebar brake handles and throttle Not included: Suspension linkage bolts (custom for ERP) (sold separately) Forks bolts (sold separately) The body kits are designed around an OEM E-Ride Pro. Some installed aftermarket parts may require additional hardware (i.e., seat riser, direct mount stem, peg drops, aftermarket brakes, forks, etc.) which can be purchased separately. Note to buyer: Kits do not include suspension linkage bolts, fork hardware, nor direct stem bolts. We realize that one kit does not fit all, with those items included. Those items can easily be purchased from this store.  

Surron LBX LBS, Segway X260 X160 - Suspension/ linkage Bolts. Anodized/ PVD coated to perfection Increased corrosion resistance Made from certified Titanium Grade 5 6AL-4V Rolled threads for greater fatigue strength Greater strength to weight ratio than steel 40% lighter in weight compared to OEM Will not work with Prickly linkage. Prickly bushings are smaller. You can purchase the bushing sleeves here Exclusively sold at Titanium Surron and participating partner stores only Top of RockerMiddle of RockerBottom of Rocker Top of ShockTriangle Bolts: Choice of none, OEM style with custom shoulder for bushing, or the larger shoulder with built-in bushing type as shown in pictures.  Will not work with Prickly linkage without OEM bushings (either use your own OEM bushings or purchase a new set here. Prickly bushings are smaller, but we have the fix. 

Motocutz Vented Number Plate with Titanium Bolts & Pre-Installed Decal Give your e-moto a clean, custom front-end look with the Motocutz Vented Number Plate Kit. For just $29.99, you get the complete setup pictured—vented number plate, titanium bolts, pre-installed graphics, and mounting zip ties. Designed for riders who want an upgraded look without the hassle of installing graphics or purchasing each component separately, this plate arrives ready to install. What’s Included Vented Number Plate – Glossy finish with functional mesh vent openings for airflow. Pre-Installed Sparkle Chrome Decal – The pictured graphic comes professionally applied, so no decal installation is required. Titanium Bolts – Includes the titanium hardware shown in the product photos for a premium finishing touch. 4 Installation Zip Ties – Everything you need for quick and simple mounting. Please Note: “Titanium” refers specifically to the included bolts—the number plate itself is not made from titanium. Each order includes the pictured decal design.

SHIPS SAME DAY OR NEXT 

Introducing the best shift lock to hit the market. Fully custom designed and made in the USA. Designed with special attention to details and strength.  Designed for Surron Light Bee Gloss Black powdercoated extra thick steel bracket with "999" logo cutout detail 4 peg mounting locations for precise fitment for every rider Perfect even peg fitment in all mounting locations Stainless Steel spacers and low-profile black steel bolts included (Check out out other product listing for low-profile Titanium bolts) Custom Triple9Moto Shift Lock Peg with end cap- CNC machined from 6061 Aluminium Choose between 2 different kit types to fit your budget: -Full Kit with Custom Triple9Moto Shift Lock Peg (Black or Raw/Silver) -Full kit with standard universal shift lock peg (Black, Silver, Red, Blue) This product listing is for a complete shift lock kit. Check out our other product listing if you would like to purchase the TRIPLE9MOTO custom shift lock peg or a standard peg by itself for your current bracket.

Introducing the best shift lock to hit the market. Fully custom designed and made in the USA. Designed with special attention to detail and strength.  Designed for Surron Ultra Bee Gloss Black powdercoated extra thick steel bracket with "999" logo cutout detail 4 peg mounting locations for precise fitment for every rider Perfect even peg fitment in all mounting locations Stainless Steel spacers and low-profile black steel bolts included (Check out out other product listing for low-profile Titanium bolts) Custom Triple9Moto Shift Lock Peg with end cap - CNC machined from 6061 Aluminium Choose between 2 different kit types to fit your budget: -Full Kit with Custom Triple9Moto Shift Lock Peg (Black or Raw/Silver) -Full kit with standard universal shift lock peg (Black, Silver, Red, Blue) This product listing is for a complete shift lock kit. Check out our other product listing if you would like to purchase the custom TRIPLE9MOTO shift lock peg or a standard peg by itself for your current bracket.

Upgrade your ride with custom foot pegs built for performance — 6061 aluminum body with Grade 5 titanium grip pins, available in 7 peg colors and 8 grip colors for a fully personalized setup. Key Features Aerospace-Grade Titanium Pins: Grip pins made from certified Titanium Grade 5 6AL-4V — stronger, lighter, and more corrosion-resistant than steel. 6061 Aluminum Peg Body: Lightweight and durable platform machined for a solid, confident feel underfoot. Mix & Match Colors: Choose your peg color and grip pin color independently. For custom color combinations not listed, leave a message at checkout. Lifetime Warranty: Built to last — backed by a lifetime warranty. Dimensions: 2¼ in. × 3½ in. Fitment Surron LBX, LBS, L1E Segway X-260, X-160 E-Ride Pro (all models) 79-Bike Falcon M, Pro Rerode R1 Ventus One SRPNT Most light e-moto compatible with Surron LBX-style pegs Not listed? Contact us to check compatibility. Note: Not designed for Talaria or Altis Sigma models. See our Talaria & Altis listing for those bikes. Includes 1 pair of foot pegs (left & right)

Upgrade your ride with foot pegs built for grip, style, and durability. These custom pegs pair a lightweight CNC aluminum base with Grade 5 titanium grips for confident footing in wet, muddy, high-vibration conditions — and a look that stands out in your choice of colors. Features Pegs machined from certified 6061 aluminum Peg grips made from Grade 5 titanium alloy for superior bite and corrosion resistance Multiple color options — for custom color pins, leave a message when ordering Lifetime warranty Dimensions: 2 1/4 in. x 3 1/2 in. Not designed for Surron LBX or most similar light e-motos. Surron Light Bee pegs are found here. Fitment Talaria MX3, MX4, MX5, XXX Altis Sigma