Collection: Light Bee

The Surron Moto Brake Dual Caliper bracket keeps your stock hand brake and allows use of a foot brake to get the real dirt bike feel. It ships with all hardware, ready to bolt-on and ride. The Dual Caliper Moto Brake Bracket is designed specifically to run Surron Ultra Bee calipers. What's in the box? 1 Dual caliper bracket 1 Brake disc guard for the Dual Caliper Bracket All necessary hardware Specs: Made From 6061-T6 aluminum (Black Color) Made to use Surron Ultra Bee Brake Calipers Made to allow use of both a Moto Foot Brake and the Moto Hand Brake Assembly  Made to Fit our 240mm Moto Brake Rotor  Fits These Bike Models: Surron Light Bee (all years) Eride Pro SS 2.0 Eride Pro SS 3.0 Eride Pro S Eride Pro SR Talaria X3 Talaria MX3 Talaria MX4 DOES NOT FIT TALARIA MX5 Surron Moto Brake Dual Caliper Bracket FAQ Will this dual caliper bracket fit my bike? It fits the Surron Light Bee, Eride Pro SS 2.0, SS 3.0, S, and SR, and the Talaria X3, MX3, and MX4. It does not fit the Talaria MX5. The bracket mounts to the factory rear swingarm, so no frame modification is needed. What else do I need to run it? The bracket is the mount only. You also need a Surron Ultra Bee rear caliper and the 240mm Moto Brake Rotor it is built around, plus a foot brake or hand brake to operate it. Run a caliper on each side to use both at once. Does it come with a caliper or brake fluid? No. The bracket ships with the bracket, a brake disc guard, and all mounting hardware. The caliper is sold separately, and there is no hydraulic system on the bracket itself, so there is nothing to bleed. What does running dual calipers actually do? It lets you run a foot brake and a hand brake at the same time, each with its own caliper on the same rear rotor. That gives you independent foot and hand control of the rear brake. It adds a second control, not extra clamping force to one brake. Can I start with one brake and add the second later? Yes. The bracket carries mounts for both calipers, so you can run a single caliper now and add the second later without changing the bracket. Most riders set it up to run both. How hard is the install? Do I need to cut or fabricate? It is a bolt-on install with all hardware included, no cutting and no fabrication. The bracket goes on at the factory rear points as part of your foot brake or hand brake install. Follow the matching install guide for the step-by-step. Ships from USA! Updated ~ 06/24/2026

Metal Motor Cover Protect your motor while giving your bike a premium, factory-inspired appearance with the Metal Motor Cover. Precision CNC machined from 6061 aircraft-grade aluminum, this motor cover is designed to provide significantly greater durability than plastic alternatives while adding a clean, high-end finish to your build. Whether you're riding trails, streets, or pushing your bike to its limits, the Metal Motor Cover helps protect one of the most exposed components on your e-moto. Engineered for an OEM-quality fit, each cover is CNC machined to tight tolerances and finished with a durable anodized coating for long-lasting performance and corrosion resistance. Features Precision CNC machined from 6061 aircraft-grade aluminum Stronger and more durable than plastic motor covers Premium anodized finish Lightweight yet extremely strong Helps protect the motor from rocks, debris, and trail impacts OEM-style fit and finish Available in multiple colors Why Choose CNC Parts? Every CNC component is built with quality, precision, and durability as the priority. We manufacture our products using premium materials and tight machining tolerances to ensure an excellent fit while giving your bike a premium custom appearance. Shipping Ships within 1–3 business days Ships directly from the United States Professionally packaged to prevent damage during shipping Package Includes 1 × CNC Metal Motor Cover Installation Professional installation is recommended. Ensure all mounting hardware is properly tightened before riding. Using aftermarket performance parts is done at the rider's own risk.

Level up your forks with these predesigned fork graphics! - To fully customize your fork guard decals please visit this page https://jbplates.com/collections/fork-guard-decals  - Please Clean Off Surface of the Plate Before Installation For Long Lasting Stickiness! - Please discard minor imperfections DNM guards → Fit DNM USD-8 (Volcano) forks — found on Sur-Ron Light Bee X and some 2023 Talarias with DNM fork swaps. KKE guards → Fit KKE 37mm forks — common on Sur-Ron Light Bee, Segway X160/X260, and Talarias with KKE forks. FastAce guards → Fit FastAce ALX forks — stock on Sur-Ron Light Bee and Talaria Sting MX3/MX4 with FastAce setups. Also fits new Eride 2.0 Fork Guards. Talaria OEM guards → Fit Talaria Factory forks — stock on Talaria Sting MX3/MX4/Newer X3 models, not compatiblewith DNM or KKE.

Dual Caliper Surron Moto Brake Kit | Talaria X3 / M4 | Eride Pro SS / SR Specs: 1 Dual Caliper Bracket (CNC Machined from 6061 T6 Aluminum, Black Anodized) 1 Surron Ultra Bee Rear PRE-BLED Brake Assembly: 1 Rear Brake Caliper 1 Moto Brake Master Cylinder 1 Brake Line Custom 240mm x 3.5mm Brake Rotor make from 12CR13 Stainless Steel Fits The Following Models: Talaria XXX, MX3, MX4 (DOES NOT FIT MX5) Surron Light Bee X (Segway X160/X260) all years Eride Pro S, Pro SS 1.0 / 2.0, 3.0 & SR Ventus One Bike Watch our Installation Video for Surron Light Bee!  View the Full Step-by-Step Install Guide & Tool List Here Ships From USA!

Single Caliper Surron Moto Brake Kit | Talaria X3 / MX4 | Eride Pro SS What’s included in the kit: 1 Single Caliper Moto Brake Bracket  1 Moto Brake Assembly OEM (Surron Brand) or Black (Gen1 Surron Ultra Bee Caliper from 2023/2024) 1 Floating or Solid 240mm x 3.5mm Brake Rotor Specs: Caliper Bracket Made From 6061 T6 Aluminum OEM Surron Brand Brake Assembly or Gen1 Black Version (Same Caliper Design as the Original 2023 & 2024 Surron Ultra Bee Brakes) 240mm Diameter, 3.5mm Thick Rotor Made From 420 Stainless Steel Floating Rotors have an Aluminum 6061 T6 Inner Carrier With Stainless Steel Rivets Comes PRE-BLED with Motul DOT 5.1 Brake Fluid Fits The Following Models: Surron Light Bee (all years) Eride Pro SS 1.0, 2.0, 3.0 & SR /  Pro S (all years) Talaria XXX / X3, MX3, MX4, MX5 (all years) Ventus One Bike (all years) Watch our Installation Video for Surron Light Bee!  View the Full Step-by-Step Install Guide & Tool List Here Ships From USA!

Upgraded 220mm Brake Rotors for Surron Light Bee, Eride Pro SS, Talaria XXX / MX3 / MX4 Specs: 220mm outer diameter  2.3mm thickness Our custom flame design improves airflow and rids brake pad dust faster Made from 12CR13 stainless steel Fits These Models: Surron Light Bee (all years) Eride Pro SS 1.0  / 2.0 / Pro S (DOES NOT FIT 3.0 or SR) Talaria XXX, MX3, MX4 (DOES NOT FIT MX5) Ventus One Bike 79Bike Install Guide Remove the wheel. Warm each rotor bolt just enough to soften thread locker. Remove bolts and lift the old rotor away. Apply a light bead of blue thread locker to clean bolts. Seat the new rotor and hand snug all bolts in a star pattern. Torque each bolt to spec with a torque wrench. Refit the wheel and spin to confirm clearance. Install fresh pads and bed everything in with slow controlled stops. FAQ Q: Does this fit the Ultra BeeA: No. This version is for the Surron Light Bee. Q: Will it rub in an MTB style caliperA: Most modern calipers accept 2.3 millimeter rotors. Center your caliper and verify clearance. Q: Do I need new padsA: Highly recommended. New pads plus a proper bed in gives the strongest bite and least noise. Q: What direction should the flame faceA: Look for the text lasered onto the rotor, the text should be facing you when you mount the rotor Ships from USA

Bash Guard / Controller Bracket Reed Nuts Includes 5 pieces M6 x 1.00 or M8 x 1.25 Reed Nuts Fits: Surron, Talaria, Eride Pro SS, Ultra Bee, ETC M6 is the size you need for Front Battery Plate on Surron Light Bee M8 is the size you need for Bash Guard / Skid Plate on Surron Light Bee Ships from USA!

Custom-logo rear brake kit for Sur-Ron, Talaria, and other e-motos. It's the same design as our Ultra Bee brake kit with a customized MXW logo. Choose the Pre-bled option to ship same day or next day. Specs Component Detail Rotor 240 mm rear, stainless steel Assembly Rear brake full assembly (caliper, line, master cylinder) Bracket Single- or Dual-mount — Silver or Black Fitment (select your bike) ✅ Sur-Ron Light Bee ✅ E-Ride Pro ✅ Ventus ✅ 79 Bike ✅ Talaria XXX / MX3 / MX4 ✅ Talaria MX5 Options E-Bike: Sur-Ron Light Bee / E-Ride Pro / Ventus / 79 Bike · Talaria XXX/MX3/MX4 · Talaria MX5 Mount style: Single or Dual mount, Silver or Black Brake option: Pre-bled (same-day/next-day shipping) or Not-bled What's in the box Rear brake full assembly Rear brake rotor (240 mm) Mount for your selected bike Installation guide FAQ How is this different from the standard Ultra Bee brake kit? It's the same brake kit with a custom MXW logo. Which bikes does it fit? The Sur-Ron Light Bee, E-Ride Pro, Ventus, 79 Bike, Talaria XXX/MX3/MX4, and Talaria MX5. Select your bike when ordering so the correct mount is included. What's the difference between Pre-bled and Not-bled? Pre-bled kits arrive filled and ready to install and ship same day or next day. Not-bled kits need to be bled after installation. What rotor size is included? A 240 mm rear rotor.

Introducing the best shift lock to hit the market. Fully custom designed and made in the USA. Designed with special attention to details and strength.  Designed for Surron Light Bee Gloss Black powdercoated extra thick steel bracket with "999" logo cutout detail 4 peg mounting locations for precise fitment for every rider Perfect even peg fitment in all mounting locations Stainless Steel spacers and low-profile black steel bolts included (Check out out other product listing for low-profile Titanium bolts) Custom Triple9Moto Shift Lock Peg with end cap- CNC machined from 6061 Aluminium Choose between 2 different kit types to fit your budget: -Full Kit with Custom Triple9Moto Shift Lock Peg (Black or Raw/Silver) -Full kit with standard universal shift lock peg (Black, Silver, Red, Blue) This product listing is for a complete shift lock kit. Check out our other product listing if you would like to purchase the TRIPLE9MOTO custom shift lock peg or a standard peg by itself for your current bracket.

Hex runs a tight hexagon mesh across the whole plate with a color fade bleeding through the grid — blue into purple into red into orange. Dark base, charged-up undertones, the kind of plate that looks like it belongs on something fast. Select the number plate you're running and we'll cut the decal to fit. Available for Motocutz, ODI, Ultra Bee, RTR, Stark Varg, KTM 85, and KTM 65 plates. Pick from nine finishes: classic Gloss and Matte, or step up to Sparkle, Chrome, Holographic, and the combo treatments when you want it to catch light. Every decal is printed on premium moto-grade vinyl, cured a full 18+ hours before we laminate it, and sealed to hold up to roost, mud, washing, and UV — crisp color, ride after ride.

Upgrade the look of your Surron Light Bee with our custom extended rear fender decal, designed to add a clean, aggressive finish to one of the most visible parts of your bike. Whether you're building a full graphics setup or just adding subtle details, this decal ties everything together. Available in five styles: choose Standard, Outline, Stripe, Cherry Blossom, or Topographical. Every style is printed on premium moto-grade vinyl and protected with a durable laminate.

Dual Caliper Bracket for Surron Light Bee, Eride Pro SS, Talaria X3 MX3 MX4 Fits the following models: Surron Light Bee ( all years ) Talaria X3 / MX3 / MX4 ( all years ) (DOES NOT FIT MX5) Eride Pro SS 1.0 / 2.0 / Pro S ( all years ) (DOES NOT FIT 3.0 / SR) Specs: Made From 6061 T6 Aluminum Bolt hole spacing is classic MTB style post mount, made to fit 203mm brake rotors (Use this adapter for 220MM rotors) Made to fit both a foot brake & hand brake Ships from USA!